物料

plastic-coated glass
round bottom
three-neck

无菌性

non-sterile

包装

pack of 1

manufacturer/tradename

Sigma-Aldrich

容量

50 mL  

正在寻找类似产品? Visit 产品对比指南

相关类别

Glassware

Laboratory Containers & Storage

一般描述

Designed for safe, reliable storage and dispensing of air-sensitive and odoriferous chemicals, pyrophorics, alkyl lithiums, Grignards, corrosives, and purified or deuterated solvents.
Features:

• High-vacuum PTFE valve-to-glass seal eliminates air contamination in storage and septum leakage after initial needle penetration

• Heavy-wall borosilicate glass

• Removable side-arm hose connector for easy attachment of vacuum and inert gas lines. For long term storage, replace hose connector with a rubber septum for secondary protection. Flasks supplied with 2 septa. Order replacement septa, Z106496

• Plastic-coated* flasks reduce chance of breakage and contain spills

*The coating is a thermoplastic film that softens appreciably at temperatures above 110°C, becoming less protective.Tests show that the coating is 100% effective in preventing flying glass when a fully evacuated flask is broken.
Sure/Stor Technique
1. Connect flask to vacuum line to pump out air and strong odor, then refill with inert gas
2. Open PTFE valve sufficiently to allow syringe needle (or pipette) to pass through septum-inlet and reach the stored liquid in flask
3. Close the PTFE valve after needle removal and pump out again to remove air and odor (use rubber septa Z553913 or Z554030 on septum-inlet)
4. For long-term storage, replace hose connector with a rubber septum for secondary protection

NOTICE: We supply high quality PTFE valves on Aldrich brand glassware that has been tested and approved by our Glass Center.

法律信息

Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

Sure/Stor is a trademark of Sigma-Aldrich Co. LLC